Home > Brand New > Brand New X4 955 Way Too Hot.

Brand New X4 955 Way Too Hot.

I used the Diamond stuff on the Deluxe and ran under 60C gaming load. Read More News AMD Phenom II X4 965 Black Edition by Joe C on August 17, 2009 Seems to me there's been a lot of hyper-ventilating about AMD's Phenom II X4 Companies can get away with selling slightly slower processors, and users get to feel like they’re pulling one over on the man by getting more than they’d originally thought. If you need a smaller cooler, CoolerMaster has these also that work well, but are smaller and use 92mm fan(s). his comment is here

ez2pz04-01-2011, 10:23 AMIt's probably best to setup a Hyper 212 to do push/pull if you have room for both fans to be installed while still allowing for the rear exhaust fan Read on for our full review. I had similar random/intermittent problems with my old board. AMD Phenom II X4 955 is running to hot AMD Phenom II x4 955 running HOT solved Phenom II x4 955 BE Getting Hot solved Phenom II x4 955 BE too

Notify me of new posts by email. On the bottom, next to the PSU, I have a bottom 120mm fan slot also which I will also be adding, and that should be pushing the air top no matter I never liked CM fans, but this one isn't that bad. Phenom II X6 @ 4.2GHz would be compared to my i7 860 @ 3.5GHz...

  • it only takes a teeny tiny bit of paste.
  • borg_7_of_904-02-2011, 05:32 PMWell yes, I did have the heat on some points of the day, so that does help with the temp going to 63c at the time.
  • I'll rummage around the forum to find the perfect heatsink FAQ.
  • Towards the rear usually works best because this can also help your airflow over your RAM and also your motherboard mosfets.
  • I first started noticing it when one of the nic ports stopped working.

or 2x4gb will be compatible ? Copyright 2000 - 2017, TechTarget | Read our Privacy Statement TechTarget publishes more than 100 focused websites providing quick access to a deep store of news, advice and analysis about the ez2pz03-31-2011, 06:13 PMI hit around 58C when I had my 955 OCed to 3.6ghz and under 100% load, but now it will only sometimes climb over 51C under full 100% load. I would suggest:1 front fan intaking1 rear fan exhausting1 top fan exhaustingAlso is your psu mounted fan up?

Yeah AS5 is also only $9 at Frys too. will try AF resit again but fast running out of thermal paste! –liam Apr 10 '12 at 20:42 remember... The core of this update centers around a new high-end processor, the Phenom II X4 955 Black Edition. http://www.tomshardware.com/forum/271342-29-what-phenom-revision the clock multiplier Lachrymosity08-31-2010, 03:00 AMThe Athlon X4 635 C3 revision is excellent from what I hear.

Hopefully nothing happens with taking it off. That is actually pretty bad.I don't think it should even touch 60*C, for the love of god consider getting a new Heatsink.What is your current cooler? Tom's Hardware Around the World Tom's Hardware Around the World Denmark Norway Finland Russia France Turkey Germany UK Italy USA Subscribe to Tom's Hardware Search the site Ok About Tom's Hardware Even push pull(2 fans on the cooler) may give you a few more degrees Cooler is clean and thermal paste is applied correctly, i have applied it yesterday to see if

I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. I get that you may not be fluent or very knowledgeable but if you check around there are many placed to find information on how to change your heat sink and solved Does AMD Phenom II X4 955 BLACK EDITION 125W(AM3) really supported by ASUS M5A78L-M LX V2(AM3+)? also, the bending is normal - have no fear :) Yeah I'm possible planning to get the AC Freezer Pro 7 next week.

Still, the processor traded blows with the 940 and basically came out tied. this content Honestly very few things heat the cpu like stress testing on a day to say basis.Unless you are stressing the system all the time, I do not think it will hurt Our review unit went up to 3.8 GHz on air and remained fairly stable; while it could go higher, not many benchmarks could finish. Gam3r01Jan 10, 2014, 4:55 AM That heatsink is really just a step sideways from the stock cooler.

I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the AMD saw an opportunity here and brought out their AM3 processors, giving them the ability to lock into AM2+ chipsets. On the P6T Deluxe it ran at 3.8 or so with the same cpu. http://linux4newbie.com/brand-new/brand-new-rig-not-performing.html Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A.

Moreover, considering that Phenom II X4 965 has increased to 140 W typical heat dissipation, its launch seems even more to be the “last resort”. I'll grab some Arctic Silver 5 from Best Buy or RadioShack (don't feel like waiting for NewEgg to send it to me) during my lunch break tomorrow and give it a I must not have it sitting right.

Last night after much gaming my temps were 32 and gpu 60 after playing wow for hours.

and with SB and Bulldozer coming out the 212+ will soon be OLD... Any suggestions on how to confirm the direction of the airflow? Because there is idling... solved HELP!

Id recommend staying as far below 60*C as you can afford.You have a good case as far as cooling is concerned. solved 2x2gb & 2x4gb RAM on amd phenom ii x4 955 win 7 32 bit ? Point is it only goes up to 60c+ when my heat is on in the room ever. http://linux4newbie.com/brand-new/brand-new-pii-good-for.html If memory serves me right, I believe the way the bracket is designed for the motherboard, I only have the option of keeping the fan where it currently is (facing upward)

Hardwood03-30-2011, 05:37 AMIf it's the 125watt version then I'd HIGHLY suggest an aftermarket cooler. Since pulling air off the back of a GPU really doesn't help lower GPU temps, I wouldn't bother setting up the fans to do push/pull toward the top of a case. EDIT: and yes, I know Furmark is GPU bench software, but it can be used to push a CPU as well. My RAM sticks have these huge heat spreaders on them, so I hope I'll be able to manage temps when I get to that pointThanks again for your input, stay tuned

ez2pz04-01-2011, 12:44 PM92mm fans were the hot ticket when dual cores just came out... AMD took the profiles idea one step further, too, giving users the ability to change settings based on specific programs or games. Also check that not too much, or too little, thermal paste was used in the application of the heat sink. Well as long as ur CPU doesn't go past 65c on full load, it wouldn't really matter I'm thinking of how ur case fans are setup, as in basic way setup.

I'm leaning for the $200 Phenom II X6 1055T because if I can get good clock speeds on a six core processor with a cheap motherboard, I should be set. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the AMD Phenom II X4 B45 running a bit too hot? I dunno what I'm gonna do when I need to remove it. -_- schnitzeljaeger03-29-2011, 02:23 PMremoving the heatsink isn't as hard as putting it on.

Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off Those cool better, but take more space. swifty_morganJan 10, 2014, 5:08 AM well now you know what the problem is............. I don't know if it's my heatsink or what, but I have to run a lot of volts through mine to get it to 3.6Ghz and the temps are too hot

If you need a smaller cooler, CoolerMaster has these also that work well, but are smaller and use 92mm fan(s). It’s worth noting at this point that while the new AM3 processors are backwards compatible with AM2+ motherboards, those AM2 chips are not forward-compatible with AM3 sockets. lo3.explicit08-31-2010, 06:38 AMthat cpu would def be ok.