Home > Hard Drive > There Are Two Tasks That Need To Be Done With A Hard Drive Before The Operating System Can Use It.

There Are Two Tasks That Need To Be Done With A Hard Drive Before The Operating System Can Use It.

Contents

Thank you so much in advance for your help! Some computers also let you press F8 to pick where you want to boot from – you may use that option instead. Tip: Using a SATA PCI interface card? Installing more than one OS may limit the amount of space that you have available for other applications, which will degrade performance." October 2, 2010 Lizzie Hi I have successfully loaded http://linux4newbie.com/hard-drive/how-to-install-operating-system-on-new-hard-drive-without-cd.html

Use it if things go astray while trying to create a dual boot system. Reply sr.robato_pcola_fl says: March 18, 2009 at 5:11 pm nice article! There. Its simple: BECAUSE THE PEOPLE WHO DO KNOW WHAT IT MEANS WON'T NEED A GUIDE TO HELP THEM.

There Are Two Tasks That Need To Be Done With A Hard Drive Before The Operating System Can Use It.

SATA drives use a thin, seven-pin data cable; IDE drives use a 40-pin ribbon cable that's usually gray. The W2K also detected the new drive when I try check in the ‘device manager'. Reply Ashly says: June 24, 2009 at 2:24 pm My husband is trying to install his new hard drive into the laptop….. Both drives should be listed on the opening screen.

  • The intent was just a secondary drive for extra space.
  • Look for a third, free connector in the middle of the cable that connects your currently installed IDE drive to the motherboard.
  • Then Win 10 went crazy.
  • Is there anyway to solve this problem?

hard-drive boot windows-10 sata share|improve this question edited Sep 3 '15 at 8:43 Hannu 3,0221617 asked Sep 3 '15 at 5:44 Moss 2851315 add a comment| 3 Answers 3 active oldest Example of an algorithm that lacks a proof of correctness How can I tell someone that they are not allowed to express their opinions, in English? Unplug both cables to the new drive and boot. Once Installed What Needs To Be Done To The Drive And What Do These Two Tasks Do questions: -when i insert the windows xp cd? -can the dual boot support win7 64-bit properly i mean (100%) without any problem - i really afraid to do this , but

Done! What To Do After Installing A New Hard Drive But if we 1st install older versions of Windows then install newer version there is no probes in the boot process. However, it does still boot up and run windows. I tried directly installed a Windows XP on my Notebook.

Thanks August 8, 2010 Pablo Picaso Like many others I am getting a BSoD. How To Format A New Hard Drive What else can I do. This will prevent frustrations about losing programs after you have already formatted your computer. How to see swallowing (if) any error messages - unable to save the record!

What To Do After Installing A New Hard Drive

What in your opinion should I do. The only thing I know is that Windows 7 (and or Vista) need to be the second OS you install. There Are Two Tasks That Need To Be Done With A Hard Drive Before The Operating System Can Use It. Reply Michelle says: March 6, 2009 at 7:59 pm Help! How To Install A Second Hard Drive solved Hard disk drive won't boot; shows up in BIOS and in Windows 10 install wizard using bootable USB drive After installing any virtual drive controllers - Windows 7 won't boot

PLEASE HLPE Reply Michael says: October 24, 2009 at 7:02 pm GREAT THANKS!!!!!!! this page Thank you for helping us maintain CNET's great community. Reply vince says: March 26, 2013 at 2:21 pm for one if the NEWB reads this it will perk his interest. When you get to the Format Partition section, NTFS is selected by default as the file system and you can leave that as is. How To Install A New Hard Drive Windows 10

I need to be able to share and receive a signal from the printer's of PC MASTER, that is, the microcomputer where the printer is installed. Every one knows what they are capable of!!! Flag Permalink This was helpful (0) Collapse - Hi windows XP and Windows & on dual hard drives by goutham_sabala / September 13, 2009 6:15 PM PDT In reply to: windows http://linux4newbie.com/hard-drive/how-to-replace-laptop-hard-drive-and-reinstall-operating-system.html By the sixth you are talking about ‘SATA ports' and ‘SATA drives.

You need to provide SATA drivers during XP installation or go in bios change AHCI to IDE in order for XP to work on newer computers that use SATA controller. How To Install A New Hard Drive Windows 7 The computer booted to XP like a charm. next goto msconfig.exe.

Proffitt Forum moderator / April 10, 2010 8:46 PM PDT In reply to: Dual Boot Windows 7 and Windows XP Such mistakes can be costly.

Heck, I've even had to go to Wikipedia to understand what SATA is! Information: 1) I had to set my mode to IDE mode on bios otherwise it would not recognize ANY OF THE DRIVES and not load to the terms of service screen. It was unallocated space. What Are The Two Main Things An Operating System Does July 15, 2010 Ron ‘elp, I have just bought shiny new E-machines with pre-installed Windows 7.

Making sure I install XP first, and 7 second. I hear many people have damaged good hard disks as a result of saying ‘yes'. If you do see a selection between "Earlier Version of Windows" and "Windows 7" after the first restart, select "Windows 7" (or it will just simply start with "Windows 7" by useful reference Add a new partition located after the Windows Vista/7 partition you just shrunk.

XP sees it, assigns a drive letter ( c:) and throws the required boot files for XP on that stupid little 10MB partition. How do I get a boot menu where I can pick and choose which OS to load?